Add on Rotary Cutter Slip Clutch Easily Add a Slip Clutch to Your Shear Bolt PTO

Description

This listing is for one independent adjustable slip clutch with a 1-3/8" smooth male shaft and a 1-3/8" smooth bore female end with two (2) grade 8 mounting bolts and nuts!
Do you have a rotary cutter that has a shear bolt protected gearbox and wish it had a slip clutch? Have you had to replace your gearbox or repair the PTO on your tractor because the shear bolt failed to shear and damaged your gearbox or tractor? Have you found a good used mower but it does not have a slip clutch and you wish is did?
Are you using a rotary cutter that has a 40hp rated gearbox on your tractor that has a lower horse power rating and thinking that the shear bolt which is designed to shear at 40hp will shear early enough to protect your 30hp tractor before it is damaged!
Here is an easy way to add an adjustable slip clutch to your rotary cutter without having to purchase a complete expensive PTO shaft!
Just remove your smooth bore shear bolt protected PTO shaft from your cutters gearbox by removing the shear bolt and retaining clip, discard the shear bolt and clip, slide this adjustable slip clutch onto the gearbox shaft and align the hole in the adjustable slip clutch with the corresponding hole in the input shaft of the gearbox and insert and tighten the grade 8 bolt and nut (non shear bolt) to mount the clutch. Then attach the smooth bore yoke of your PTO shaft to the slip clutch's smooth male shaft, align the holes and insert and tighten the second grade 8 mounting bolt and nut and the unit is installed. Check to make sure that the PTO shaft has enough clearance as you slowly raise and lower your mower with your tractors hydraulics and make sure the shaft doesn't bottom out causing the shaft to bend. If you need to shorted the shaft slightly to allow for proper clearance remove the shaft from the adjustable slip clutch, slide the two sides of the PTO apart and cut an equal amount off of each side as needed, reinstall the PTO shaft to the adjustable clutch and recheck for necessary clearance.
Now just adjust the slip clutch to match your horse power requirements making sure to consider both the horsepower rating of the mower and tractor and adjust the overall length of the clutch springs to match the corresponding rating on the provided clutch adjustment table. If you have a rotary cutter with a 40hp gearbox and you have it mounted on a 30hp tractor you would want to set the clutch to slip at 30hp to protect the tractor as it has the lower horsepower rating of the two. If you set it to match the rotary cutters gearbox you could potentially damage the PTO drive shaft and components of the tractor should you hit something hard enough.
Desired Horse Power Rating / Overall Clutch Spring Length Adjustment:
20hp - 28.50mm
25hp - 28.25mm
30hp - 28.00mm
35hp - 27.50mm
40hp - 27.00mm
45hp - 26.50mm
50hp - 26.00mm
55hp - 25.50mm
Specifications
1-3/8" Smooth Bore Female End
1-3/8" Smooth Shaft Male End
Grade 8 Mounting Hardware Included
7mm Adjustable clutch springs
10mm Adjusting bolts
Adjustable / Replaceable Friction Disc
Adjustment Range from 20 - 55 Horse Power
We sell a complete line of replacement PTO shafts and parts. If you don't see the parts you need listed please contact us we would love to earn your business. We are listing new items frequently so please check our store often.
Replaces Part Numbers: ISC-SM-SM
We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information.
Shipping Information
Bidder pays for all shipping charges.
Seller will
combine multiple winning bids
to
save bidder money
on shipping.
Items will be insured for the bid price.
Our warehouse hours are Monday – Friday 8:00am – 5:00pm
We are located at:
Brooks Ag Parts
1726 State Highway 125
Amelia, OH 45102
Payment Terms
High bidder prepays and adds for above shipping and handling charges.
We accept credit cards and PayPal.
Items must be paid in full within 10 days of auction end.
Personal check orders will be held until check clears.
Ohio
Residents Only
State of
Ohio
residents must add 6.75% state sales tax.
Both product and shipping / handling charges are subject to state sales tax
Return Policy
Your complete satisfaction is important to us, should you have and problems please let us know so we can correct them.
We have a simple return and refund policy.
Bidder is responsible for all shipping charges on returned merchandise.
All returns must be insured when returned; we will not refund items that are damaged when returned.  All returns must be within 30 days of auction end.
Please ask questions before you bid, we would rather you get the right part the first time! It saves us both time and money to make sure we have the right item for your needs!
If you have any question about the part you need, please call first we will be glad to answer your questions.
Additional Information
The use of original equipment manufacturer's names, drawings and part numbers are used for identification purposes only, and Brooks Ag Parts is in no way implying that any of our products are original equipment parts.  All parts are guaranteed to meet with your approval! If you are unhappy with your purchase just return it to us and we will be happy to refund your purchase.