Bunn SH Server & 1SH Docking Station 1½ Gal 120V 90W SN TS00304338 & RW10184962

Description

This is a Bunn 1.5 gallon capacity soft heat (SH) server and docking station. All specifications are in the pictures. These pictures are a large part of the description. Examine them for what you are getting.
The server has graphics for "Hazelnut" which can be removed (it is glued on) or covered with a new label. It has very minor chipping along the edges (seen in the picture).
It was cleaned, tested and is working as it should. The timer light comes on, however, I did not let it on until it went out. It is probably set to "OFF". This can be changed by removing the base trim (cover) and turning the small straight blade adjuster. I assume "OFF" means the heat timer is off and will not turn the heat off. Just take the server off the stand. (The stand is where the power comes from.)
I am including copies of the Installation and Operating Manual for the server, Installation and Operating Guide for the 1SH stand and the Illustrated Parts Catalog for the SH server in a 3-hole clear-front report cover. There is a drip tray included with this server set.
The legs will be shipped detached from the stand to make the shipping size smaller and to help prevent damage.